Senior Battery Management System Electrical Engineer

Archer Aviation is an innovative aerospace firm located in San Jose, California, focused on developing a pioneering all-electric vertical takeoff and landing aircraft. Our mission is to revolutionize sustainable air mobility, offering a solution that carries four passengers while minimizing noise pollution.We aspire to reach new heights and tackle complex ch…

At Archer, we are pioneering the future of aviation with our all-electric vertical takeoff and landing aircraft, designed to enhance sustainable air mobility. Our innovative engineering team is dedicated to creating an aircraft that accommodates four passengers with minimal noise pollution.We believe that tackling complex challenges requires a diverse team, and we are committed to fostering an inclusive workplace that values and celebrates our unique perspectives. Join us in our mission to revolutionize air travel.Key Responsibilities:As an Electrical Analysis Engineer, you will play a critical role in the analysis of circuits within Archer's high voltage battery management system. Your contributions will directly impact the safety and reliability of our innovative aircraft.Conduct thorough circuit schematic analyses, collaborating with safety engineers to identify potential single-point failures.Evaluate the system-level implications of individual component failures within printed circuit board assemblies (PCBAs).Aggregate power consumption data of the BMS PCBAs across various operational modes and correlate findings with laboratory tests.Perform worst-case accuracy analyses on measurement circuits.Utilize circuit simulation tools to model and analyze hardware circuits to support accuracy evaluations.Employ software for automated circuit analysis to facilitate schematic-level Failure Modes and Effects Analyses (FMEAs).Assess the system-level impacts of single-event upsets and latch-ups.Collaborate with reliability engineers to understand electrical operating conditions and determine failure rates.Carry out electrical stress analyses and component derating evaluations for individual components.Work closely with design engineers to ensure BMS hardware meets Archer's stringent safety, accuracy, and reliability standards.

About Archer Aviation Archer Aviation, based in San Jose, California, is developing an all-electric vertical takeoff and landing (eVTOL) aircraft designed for sustainable air mobility. The company aims to create a quiet, environmentally conscious aircraft that seats four passengers. Archer values ambitious goals, technical challenges, and a workplace that welcomes diverse perspectives and backgrounds. Role Overview: Battery Test Engineer - Electrical The Battery Test Engineer - Electrical will focus on the testing and validation of battery and battery management system (BMS) components for Archer's eVTOL aircraft. This role involves hands-on work with prototype and certified hardware, as well as collaboration with multiple engineering teams. Main Responsibilities Conduct systems and integration testing for prototype and certified battery and BMS components. Work with teams across BMS, Controls, Engines, Flight, Integration, and Systems to develop and execute testing plans for flight hardware. Assist with regression testing activities. Support testing related to electromagnetic compatibility (EMC), short circuit, and electrical design infrastructure. Develop and test mission profiles for battery systems. Help build digital testing infrastructure for data storage and analysis. Analyze test data and collaborate with engineering teams to drive improvements. Design and implement automated test equipment as needed. Support electrical infrastructure design for Production and Reliability labs. Prepare technical reports for FAA regulatory submissions.

Archer Aviation, based in San Jose, California, develops all-electric vertical takeoff and landing aircraft. The company focuses on advancing sustainable air mobility, designing vehicles that carry four passengers and operate with low noise. Archer values a diverse team and aims to create an inclusive workplace where different perspectives drive better solutions. The company encourages collaboration and respects the unique contributions of every employee. Role Overview The Senior Battery Design Engineer will lead efforts to design high voltage battery pack components for multiple aircraft programs, including both commercial and defense projects. This role covers the full design process, from initial concept through completion. What You Will Do Lead design of high voltage battery pack components across various aircraft programs, from concept to final product. Collaborate with CAE engineers, quality assurance, testing, supply chain, and manufacturing teams to ensure strong design and product quality. Provide hands-on support for prototyping, assembly, and troubleshooting throughout the design cycle. Work with integration and certification teams to meet all FAA certification requirements. Develop innovative battery designs tailored to the demands of aerospace applications.

About Archer Archer, based in San Jose, California, designs and builds all-electric vertical takeoff and landing aircraft. The company focuses on sustainable air mobility and aims to transport four passengers while reducing noise pollution. Archer values diversity and strives to create an inclusive workplace where every team member’s perspective contributes to smarter solutions. Role Overview The Thermal Analysis Engineer for Battery Systems will support the design and performance of battery packs and modules for Archer’s aircraft. This position involves simulation, testing, and collaboration across multiple engineering teams to ensure reliable and safe thermal management. Main Responsibilities Run thermal analysis and simulations on battery packs and modules using advanced CAE tools. Develop simulation methods and workflows to improve team productivity. Design and optimize battery thermal management systems, including cold plates and phase change materials, to achieve high performance and safety. Plan and conduct thermal testing to validate and refine analytical models. Work closely with mechanical, electrical, control, and systems engineering teams to integrate thermal solutions and models. Prepare detailed reports and presentations documenting findings, design recommendations, and test results.

Archer, an innovative aerospace company located in San Jose, California, is pioneering the development of an all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, designing and manufacturing aircraft capable of carrying four passengers with minimal noise pollution.We set ambitious goals and tackle complex challenges, believing that a diverse workplace fosters smarter solutions and deeper insights, driving our collective success. We are committed to creating an equitable and inclusive environment that values our differences and supports all team members.What You’ll DoLead and execute comprehensive abuse testing for cells, modules, and battery packs, focusing on Thermal Runaway, Short Circuit, Over-Temperature, Overcharge, and Overdischarge scenarios.Conduct thorough data analysis and compile detailed reports.Design and develop sub-scale and full-scale test rigs for Safety/Abuse tests, including PCBA/hardware and software integration.Create and deploy custom thermal abuse test equipment and controllers.Develop bespoke test equipment and automation software to facilitate cross-functional battery R&D testing.Utilize NX CAD software for the mechanical design of test rigs.Enhance test development using LabVIEW, Python, and other relevant tools.Assist in the assembly of small-scale buck and prototype builds.Provide support for troubleshooting and preventative maintenance of battery testing equipment and setups.Contribute to failure review processes.Work alongside the battery engineering team on cell, buck, and pack teardown procedures.Innovate and implement new test procedures, executing them effectively.Generate reports for submission to the FAA.

Join Archer Aviation, a pioneering aerospace firm located in San Jose, California, dedicated to revolutionizing air mobility with our all-electric vertical takeoff and landing aircraft. Our mission is to promote sustainable air travel while ensuring minimal noise pollution, as our aircraft is designed to safely transport four passengers.We are committed to solving complex challenges and fostering a diverse workplace that fuels innovation and success. Our inclusive environment values differences and supports every team member in their journey towards excellence.As a Senior Propulsion Electrical Systems Engineer, you will lead the lifecycle of Airborne Electronic Hardware (AEH) systems for our electric propulsion units (EPU). This pivotal role connects intricate power electronics design with aircraft certification, encompassing responsibilities like defining requirements, overseeing DO-254 compliance, and conducting thorough verification and validation (V&V) campaigns for high-voltage inverters and motor control hardware. Your contributions will ensure our electric engines adhere to rigorous safety standards and environmental resilience necessary for Part 33/Part 23 certification.

archer56 seeks a Senior Electrical Systems Engineer based in San Jose, California. This position centers on creating and improving electrical systems that support the company's technology goals. Role overview Work will involve designing new electrical systems and contributing to the development of advanced solutions. Projects often require a focus on technical progress and ongoing innovation within the organization. Key responsibilities Design and develop electrical systems for new and existing projects Advance technology initiatives within the company Support innovation efforts across engineering teams

Archer is a pioneering aerospace company located in San Jose, California, dedicated to developing an innovative all-electric vertical takeoff and landing aircraft. Our mission is to promote sustainable air mobility, designing, manufacturing, and operating an aircraft that accommodates four passengers while minimizing noise pollution.We aim high and tackle complex challenges, believing that a diverse workforce enriches our insights and propels us towards collective success. Archer is committed to fostering an equitable and inclusive environment that values differences and celebrates each team member.What You’ll Do:As a Battery Controls Integration Engineer at Archer, your primary responsibilities will include the integration of our high-voltage battery controls system onto test platforms, ensuring the verification of Battery Management System (BMS) safety-critical functions. This role is essential for facilitating the use of electric vertical-takeoff-and-landing aircraft in urban air mobility settings. Your contributions will encompass all stages of the product development lifecycle, including development, implementation, validation, and ongoing improvement.Core Responsibilities and Development Focus:Verification and Testing Strategy: Design and implement verification procedures and test plans across various testing environments including Simulation, Software-in-the-Loop (SIL), and Hardware-in-the-Loop (HIL).Integrated Testing Ownership: Lead the testing of the Battery Management System (BMS) controls hardware/software integrated system functionalities on safety-critical components, utilizing HIL, SIL, and high-voltage (HV) integrated labs.Automation and Infrastructure: Update and maintain automated test cases in alignment with BMS functionality development for effective verification and regression testing, particularly in model-based environments.Test System Development: Offer commissioning and maintenance support for the comprehensive testing infrastructure required for HIL testing of BMS controls, algorithms, and software.Process and Infrastructure Improvement: Take responsibility for the automated testing platform, enhancing efficiency, accuracy, and automation level for BMS control system verification. Contribute to continuous improvement of test infrastructure, including writing and debugging test scripts for HV HIL systems.Cross-Functional Collaboration and Integration:...

Archer Aviation is developing all-electric vertical takeoff and landing (eVTOL) aircraft in San Jose, California. The company’s mission centers on creating sustainable air mobility solutions, with aircraft designed to carry four passengers while minimizing noise for quieter, cleaner transportation. Archer values diversity and inclusion, encouraging every team member’s perspective and fostering equity throughout the workplace. Role overview The Senior Staff Engineer - Battery Cell Stack will lead the design and development of high-voltage battery pack components for both commercial and defense eVTOL aircraft. This position plays a key role in shaping battery technology for multiple aircraft programs. What you will do Oversee the full design process for high-voltage battery pack components across several aircraft platforms. Collaborate with CAE engineers, quality assurance, testing, supply chain, and manufacturing teams to align on project goals. Engage in hands-on prototyping, assembly, and root cause analysis during the design cycle. Work with integration and certification teams to ensure battery systems meet FAA certification standards. Create and refine battery design solutions that fulfill strict aerospace requirements. Establish and promote design standards and best practices for Archer’s battery systems. Mentor junior engineers working on battery design. Develop and maintain the battery hardware technology roadmap for future products and applications.

Archer Aviation is a pioneering aerospace firm headquartered in San Jose, California, dedicated to developing an all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to enhance sustainable air mobility, designing and manufacturing an aircraft that can transport four passengers with minimal noise and environmental impact.We aim high and tackle challenging problems, believing that a diverse workforce fosters innovation, insights, and collective success. Our commitment is to create an equitable and inclusive workplace that values our unique perspectives and supports every member of our team.Key Responsibilities:Conduct electrical and environmental testing of prototype and certified batteries for eVTOL aircraft.Collaborate with cross-functional teams to create and implement test plans for flight-critical hardware.Execute acceptance testing on battery modules, packs, and charge port assemblies.Design sub-scale test rigs for mechanical and environmental testing, involving PCBA/hardware and software development.Develop and deploy custom test equipment and controllers.Create bespoke test equipment and automation software to facilitate cross-functional battery R&D testing.Perform mechanical design of test rigs using NX CAD software.Utilize LabVIEW, Python, and other test development tools for testing purposes.Analyze test data and collaborate with engineering teams to share insights.Develop automated test equipment as required.Innovate test procedures and oversee testing execution.Generate reports for FAA submission.

Archer Aviation, an innovative aerospace firm headquartered in San Jose, California, is on a mission to revolutionize air travel with our all-electric vertical takeoff and landing aircraft. Our commitment to sustainable air mobility drives us to design, manufacture, and operate an aircraft capable of carrying four passengers while minimizing noise pollution.We are passionate about addressing complex challenges and believe that a diverse workforce enhances our problem-solving capabilities, leading to superior insights and success. We strive to foster an equitable and inclusive workplace that celebrates the unique contributions of every team member.Key Responsibilities:Conduct verification and validation of safety-critical software components for the aircraft battery management system (BMS) in alignment with DO-178C standards.Develop and document detailed test plans, cases, and procedures based on software requirements.Perform Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) testing to validate battery algorithms and drivers.Identify, document, and manage software defects using automated tracking systems; collaborate with development teams to analyze root causes and validate resolutions.Create and uphold automated test scripts and frameworks (C/C++, Python) to optimize testing efficiency and coverage.Design and implement tests for verifying software fault detection and diagnostic algorithms, including insulation breakdown, short circuits, and sensor failures.Analyze sensor data (cell voltages, pack current) and test outcomes to ensure accurate state estimation and protective function performance.Engage in software audits and reviews to ensure compliance with DO-178C certification requirements.

Join our innovative team at Etched as an Electrical Engineer specializing in Hardware Systems. In this role, you'll be responsible for designing, developing, and testing cutting-edge hardware solutions that meet the evolving needs of our clients. You will collaborate with cross-functional teams to ensure the successful implementation of advanced technologies.Your expertise will contribute to the creation of high-quality electronic systems, ensuring they are reliable and efficient. We are looking for a proactive engineer who thrives in a fast-paced environment and is passionate about technology and innovation.

At Antora, we are revolutionizing industrial energy solutions by developing advanced thermal batteries designed to deliver continuous, low-cost energy for industrial operations. Proudly manufactured in the U.S., our modular thermal batteries provide dependable heat and power, empowering industrial facilities of any size to achieve predictable and profitable decarbonization. We are on a mission to electrify global industry while supporting American manufacturing, reducing energy costs for consumers, and enhancing the competitiveness of U.S. industry.We are expanding our team with individuals who prioritize collaboration and purpose, cherish connection through laughter and joy, and approach their work with humility and openness. Our commitment to fostering a diverse, passionate, and innovative team is unwavering as we strive for a future where every industrial facility worldwide is powered by abundant, clean, low-cost energy.Position SummaryWe are on the lookout for a Senior / Staff Systems Engineer in San Jose—an enthusiastic, inquisitive, and dedicated engineer to join our Technology Development team. Your expertise will contribute to delivering zero-carbon industrial heat and power through our innovative solid-state thermal battery solutions.This role is deeply collaborative and central to system innovation. You will engage across various disciplines to influence the architecture and operational philosophy of Antora’s future offerings. Leveraging first-principles modeling, data analytics, and real-world performance insights, you will accelerate our mission to decarbonize the industrial sector at scale.

Archer Aviation is an innovative aerospace company headquartered in San Jose, California, dedicated to revolutionizing air travel with our all-electric vertical takeoff and landing aircraft. Our mission is to enhance the future of sustainable air mobility, providing a quiet and eco-friendly mode of transportation for up to four passengers.At Archer, we are committed to tackling significant challenges with high aspirations. We recognize that a diverse workforce fosters smarter solutions and deeper insights, ultimately guiding us to success. We strive to create an equitable and inclusive workplace that honors our differences and supports every team member.Key Responsibilities:As the BMS Hardware Manager, you will spearhead the development of Archer's high voltage battery management system (BMS) and charge control unit (CCU).Your specific duties will include:Building and mentoring a team of electrical engineers focused on BMS and CCU hardware development.Driving architectural decisions and evaluating new hardware concepts to enhance maturity.Making pivotal technical choices while balancing performance, safety, timelines, and certification requirements.Leading engineering design reviews and overseeing flight hardware releases.Guiding cross-functional teams in hardware analysis projects such as WCCA, FMEA, and PSSA to ensure safe flight and certification.Managing technical interactions with suppliers, partners, and regulatory authorities.Supporting Manufacturing, Quality, and Supply Chain teams during new product introduction (NPI) and production ramp-up.Collaborating with program teams to deliver high-quality hardware within established timelines.Coordinating with integration and testing teams during the deployment of hardware across integrated test labs and aircraft.

About Archer Aviation Archer Aviation, based in San Jose, California, is developing all-electric vertical takeoff and landing aircraft designed to transport four passengers with low noise and minimal environmental impact. The company is committed to advancing sustainable air mobility and values a diverse, equitable, and inclusive workplace where every team member can grow professionally. Role Overview The Battery Test and Build Technician will support the design, assembly, and testing of battery systems and related components. This hands-on role involves building prototypes, supporting equipment assembly, and assisting with battery charging operations for ongoing projects. What You Will Do Build battery packs, cell bucks, and components for Battery BMS, including design and testing tasks. Assist with assembling Battery EOL (End of Line) equipment. Support mechanical builds for advanced project testing. Fabricate securing hardware and harnesses for use with testing equipment and assets. Construct test fixtures for cells, bucks, and packs. Perform small-scale buck and prototype builds. Assist with battery pack charging operations. Location San Jose, California, United States

Trackonomy Systems is seeking a Senior NPI Engineer specializing in Electrical Engineering to help drive the next generation of technology solutions from our San Jose location. Role overview This position plays a key part in Trackonomy’s mission to develop technology that improves safety and security across industries. The Senior NPI Engineer will contribute to projects that range from fire prevention systems to advanced security measures, supporting initiatives that have a real-world impact. Collaboration and community At Trackonomy, every team member is valued as a core contributor. The company fosters a culture where each person’s input shapes the vision and direction. Expect to work closely with senior leaders and colleagues from different departments, building connections that support both personal and professional growth. Professional development Trackonomy emphasizes learning through hands-on experience and collaboration. This role offers the chance to take on varied responsibilities, learn directly from experienced leaders, and influence the scope of your work based on your skills and achievements. The company values ambition, innovation, and the drive to make a difference, providing an environment where merit and opportunity are prioritized. Purpose and impact Work at Trackonomy centers on delivering technology that makes a difference. The solutions developed here not only transform industries but also contribute to saving lives. Senior NPI Engineers play a central role in this mission, helping bring new products to market that address critical challenges.

Join Antora as an Electrical Engineering Manager, where you will lead a dynamic team of engineers to drive innovative solutions in electrical design and system integration. In this pivotal role, you will oversee project development, ensuring that all electrical components meet stringent industry standards while fostering a collaborative environment.

Electric Hydrogen is dedicated to revolutionizing how we produce energy. Our mission is to create sustainable hydrogen solutions through renewable electrolysis, making it affordable for heavy industry and significantly reducing carbon emissions.We are in search of a Senior Staff Electrical Engineer specializing in Grid Power to spearhead the development of connection specifications between Electric Hydrogen’s power systems and the medium voltage utility grid. This role involves overseeing all facets of electrical installation design, which includes collaborating with third-party EPCs and conducting internal design tasks. You will perform in-depth power systems analysis using advanced modeling and simulation software to assess critical system characteristics such as load and power flows, short circuit analysis, transient stability, and stability under various operational conditions.This position is based onsite in San Jose, CA and reports directly to the Director of Power Platform.

Join Our Team at PRIME ElectricAt PRIME Electric, we foster a culture rooted in empathy, trust, and inclusivity, which forms the backbone of our recruitment and employee development strategies. We are dedicated to nurturing talent and providing our team members with the support they need to thrive. Our growth-oriented mindset encourages innovation and the pursuit of creative solutions in an ever-evolving environment. With a range of services encompassing the full project lifecycle, we specialize in electrical construction, maintenance, underground utilities, renewable energy, and low voltage technology solutions.We are proud to be recognized as one of the best places to work in Silicon Valley!Position OverviewIn this role, you will operate under minimal supervision, providing expert technical design, consultation, and support to both internal teams and external clients, ensuring projects adhere to all engineering standards. You will lead significant projects, supervising junior engineers and collaborating closely to meet project specifications, comply with current codes, and uphold PRIME Electric Engineering Standards. As a key contributor, you will be responsible for designing, developing, and producing construction documents and permits for electrical systems.