Senior Optical Signal Integrity and Power Integrity Engineer

Archer Aviation Inc., located in San Jose, California, is pioneering the aerospace industry with our innovative all-electric vertical takeoff and landing aircraft. Our mission is to revolutionize sustainable air mobility, creating an aircraft capable of carrying four passengers while minimizing noise pollution.At Archer, we aim high, tackle complex challenge…

Archer Aviation, a pioneering aerospace company headquartered in San Jose, California, is at the forefront of developing an all-electric vertical takeoff and landing aircraft aimed at revolutionizing sustainable air mobility. Our innovative design produces a quiet, efficient aircraft capable of transporting four passengers while minimizing environmental impact.We believe in setting ambitious goals and tackling complex challenges, fostering a diverse workplace that enhances our collective intelligence, drives insightful solutions, and paves the way to success. Archer is committed to nurturing an equitable and inclusive atmosphere that values and celebrates our unique perspectives and talents.Role Overview:We are on the lookout for a talented Manufacturing Systems Integration Engineer to architect, deploy, and maintain cohesive manufacturing systems that effectively link operational technologies with enterprise-level business solutions. The ideal candidate will possess practical experience with SCADA/HMI systems, PLM tools, and ERP integrations, driving enhancements in manufacturing efficiency, data management, and system dependability.Key Responsibilities:Design and implement comprehensive manufacturing systems that interlink shop-floor operations with enterprise frameworks.Create and uphold system architecture documentation, integration protocols, and technical roadmaps.Drive cross-functional efforts to merge MES with business applications and enterprise data infrastructures.Diagnose, optimize, and enhance system interfaces, data pathways, and communication protocols.

Archer Aviation is an innovative aerospace company situated in San Jose, California, dedicated to creating an all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, designing and manufacturing an aircraft capable of carrying four passengers with minimal noise output.We aim high and tackle complex challenges, believing that workplace diversity enriches our problem-solving capabilities, leading to greater insights and collective success. We strive to foster an equitable and inclusive environment that celebrates the unique contributions of every team member.About The Role:As we ramp up production of our cutting-edge Midnight 1.0 aircraft and develop the next-generation Midnight 1.1 platform, you will play a pivotal role within the Manufacturing Design Engineering (MDE) team, linking aircraft design and production seamlessly.In this position, you will lead the manufacturing strategy for aircraft structures and act as a technical expert responsible for defining and scaling the production processes, supporting aircraft builds from prototype stages to early production.You will collaborate across teams, including Design, Quality, Supply Chain, and Certification, to implement industry-leading manufacturing solutions for both current and future aircraft models.What You’ll Do:Provide leadership and technical guidance for structural assembly and integration processes, overseeing both prototype and production assembly sequencing.Manage the complete lifecycle of structural component builds, collaborating with design, quality, and certification teams to embed manufacturing best practices.

Role Overview ServiceNow is seeking a Senior Staff Software Engineer, Integrations (Tech Lead) based in Santa Clara. This role leads integration projects that improve how technology fits together across the company. The position sits within the Engineering team and works closely with colleagues from different disciplines. What You Will Do Lead design and development of integration solutions that strengthen ServiceNow’s products. Collaborate with cross-functional teams to deliver projects that support customer needs. Drive initiatives that make technology more efficient and effective across the organization.

Archer Aviation is an innovative aerospace company headquartered in San Jose, California, dedicated to revolutionizing air travel through the development of an all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, allowing four passengers to travel quietly and efficiently.We strive for excellence in our endeavors and recognize that a diverse workforce enriches our problem-solving capabilities and fosters success. Our commitment to creating an equitable and inclusive workplace supports and celebrates the unique contributions of every team member.About the Role:As a Staff Manufacturing Test Engineer, you will play a crucial role within the Manufacturing Engineering team. Your primary responsibility will be to conduct functional and end-of-line testing on fully assembled aircraft, ensuring they adhere to performance, integration, and system-level standards prior to delivery and flight testing. Your expertise will be essential in validating that each aircraft build meets operational expectations by verifying systems, software, electrical behavior, and overall readiness for functionality.Your Responsibilities:Develop and manage the comprehensive functional test strategy for aircraft systems throughout the manufacturing process, from initial builds to certified production.Facilitate cross-functional collaboration among manufacturing, design engineering, flight testing, and certification teams to establish test requirements and ensure thorough coverage.Design and implement automated testing solutions to enhance quality, consistency, and production efficiency.

Archer Aviation, based in San Jose, California, is building all-electric vertical takeoff and landing aircraft designed for sustainable air travel. The company’s Midnight aircraft carries four passengers and operates with low noise. Archer values a diverse team and aims to create an inclusive workplace where different perspectives drive innovation. Role Overview The Staff Manufacturing Design Engineer - Standards and Methods will play a key part in scaling production of the Midnight 1.0 aircraft and developing the Midnight 1.1 platform. This position sits within the Manufacturing Design Engineering (MDE) team and focuses on bridging aircraft design with efficient, high-rate manufacturing. The role centers on establishing and maintaining standardized manufacturing processes to support Archer’s growth. Main Responsibilities Develop, document, and maintain standardized manufacturing engineering methods and best practices across the MDE organization. Create and uphold common frameworks for manufacturing planning, process definition, work instruction formats, and readiness for builds at every stage: development, certification, and production. Build a centralized, version-controlled knowledge base for manufacturing standards and processes. Work closely with Design, Quality, Supply Chain, and Certification teams to define and implement manufacturing solutions that support bringing new aircraft to market. Location Santa Clara, California, United States

Role overview halo-industries seeks a Staff Process Engineer based in Santa Clara, California. This position centers on developing and refining manufacturing processes to enhance both quality and efficiency across production lines. Collaboration is key in this role. The Staff Process Engineer works with teams throughout the company, supporting continuous improvement efforts and helping to introduce new solutions that strengthen day-to-day operations. What you will do Develop and optimize manufacturing processes with a focus on quality and efficiency Work closely with cross-functional teams to support ongoing process improvements Help introduce new solutions that improve operational performance

Join our dynamic team at Arista Networks as a Senior Signal Integrity and Power Integrity Engineer. In this pivotal role, you will leverage your expertise to ensure the integrity of signal and power within complex electronic systems. You will work closely with cross-functional teams, contributing to the design and validation of high-performance networking solutions.

About Halo IndustriesHalo Industries is pioneering innovative technology designed to transform the longstanding semiconductor material slicing process. Our cutting-edge laser-based technology significantly reduces waste, optimizes material cost efficiency, and fosters advancements across dynamic sectors such as automotive, telecommunications, and power electronics. Established in 2014 at Stanford University, Halo secured substantial funding in 2024, enabling swift expansion, strategic customer interactions, and the initiation of high-volume manufacturing.Join Our TeamWe are on the lookout for a Senior Manufacturing Engineer who will bring technical expertise and foster operational excellence within our manufacturing processes. This pivotal role serves as a vital link between product design (Engineering/R&D) and efficient mass production (Production Floor). As the Senior Manufacturing Engineer, you will be the go-to technical specialist responsible for process definition, control, documentation, and ongoing enhancements on the manufacturing line.Key ResponsibilitiesEngineering to Production TransitionR&D/Production Liaison: Serve as the technical intermediary between Research & Development and Production. Convert design intentions, specifications, and performance criteria into actionable manufacturing processes.New Product Introduction (NPI) Support: Engage in product design assessments, ensuring compliance with Design for Manufacturability (DFM) and Design for Assembly (DFA) principles to preempt challenges before they reach production.Manufacturing Process Definition: Innovate, develop, and validate new production equipment, tools, and fixtures essential for product assembly and evaluation.First-Run Analysis: Spearhead and assist initial production runs, gathering data and delivering prompt, root-cause corrective actions to address any process or product challenges encountered during ramp-up.Production Floor Documentation & ControlGuarantee that all manufacturing processes are standardized, regulated, and precisely documented to uphold quality and consistency.Process Documentation Management: Create, evaluate, and sustain essential manufacturing documentation, including:Operator Method Sheets (OMS) or Standard Operating Procedures (SOPs): Develop comprehensive, visual, and user-friendly work instructions for all production stages, covering assembly, inspection, and testing.

Join Integrated Resources Inc. as a Big Data Platform Staff Engineer and play a pivotal role in designing and implementing cutting-edge data solutions that drive business insights and foster innovation. You will be part of a dynamic team dedicated to harnessing the power of big data to optimize processes and enhance decision-making across the organization.

Thank you for considering a career with Oklo! We are on a mission to revolutionize the energy sector, and we invite you to join our dynamic team as a Systems Engineer focused on Requirements and Integration. In this exciting role, you will leverage your 3-5 years of experience in requirements management within regulated industries to support our multidisciplinary engineering projects. Your expertise will ensure that requirements are meticulously structured, traceable, verifiable, and seamlessly integrated into our product lifecycle, ultimately contributing to the design and deployment of innovative products and services at Oklo.Lead the configuration and application of Siemens Teamcenter Requirements for the development and management of requirements within engineering teams.Collaborate closely with design, analysis, and regulatory teams to establish and maintain clear, verifiable, and traceable requirements.Develop and sustain requirement hierarchies, traceability matrices, and verification plans.Promote consistency and quality of requirements across technical disciplines to ensure compliance with regulatory and safety standards.Provide training and support to team members on Siemens Teamcenter Requirements and best practices in requirements development.

Location: Santa Clara, California, United States About Archer Aviation Archer Aviation Inc. designs and builds all-electric vertical takeoff and landing aircraft. Based in San Jose, the company focuses on sustainable air mobility, developing aircraft that can carry four passengers with reduced noise. Archer’s team works to advance electric aviation from concept through manufacturing and operation. The company values diversity and inclusion, believing that a range of perspectives leads to stronger results. Archer supports an equitable workplace where differences are respected and every team member has the opportunity to thrive. Role Overview Archer is scaling up production of the Midnight 1.0 and developing the next-generation Midnight 1.1 platform. The Senior Manufacturing Design Engineer - Methods and Standards will join the Manufacturing Design Engineering (MDE) team. This position connects aircraft design with high-rate production, focusing on standardizing manufacturing processes across the organization. This engineer will help build and maintain a centralized, version-controlled knowledge base for complex manufacturing processes. The role involves close collaboration with Design, Quality, Supply Chain, and Certification teams to implement manufacturing solutions that support bringing new aircraft to market. What You’ll Do Develop, document, and maintain standardized engineering methods and best practices for the MDE organization. Support the creation of manufacturing planning frameworks, process definitions, work instructions, and build readiness for development, certification, and production phases.

At d-Matrix, we are dedicated to harnessing the power of generative AI to innovate technology. As industry leaders in both software and hardware, we continually push the limits of what can be achieved. Our culture is built on respect and collaboration, emphasizing humility and direct communication.We celebrate inclusivity, where diverse perspectives lead to superior solutions. We invite passionate individuals who are eager to tackle challenges and are driven by results to join us. Are you ready to explore your potential? Together, we can redefine the endless possibilities of AI.Role OverviewWe are in search of an enthusiastic Manufacturing Engineering Intern with a solid foundation in Electrical Engineering to join our Operations team. This role serves as a vital link between design and physical hardware, focusing on the PCB lifecycle from initial layout to bare board fabrication.This is a remarkable opportunity for students or recent graduates looking to dive into the AI hardware sector. You will work at the convergence of design, quality, and manufacturing, ensuring our high-performance boards are crafted for optimal reliability, scalability, and signal integrity.Key ResponsibilitiesDesign-to-Release Orchestration: Engage in the entire PCB design release process, including reviewing Gerber files, validating stack-ups, and addressing DFM (Design for Manufacturing) inquiries from external fabrication vendors.Supplier Yield Monitoring: Monitor and analyze manufacturing yields at PCB suppliers, providing performance updates to the Operations team while pinpointing areas for process enhancement.Quality & Compliance: Assist in bare PCB qualification and acceptance testing, adhering strictly to IPC standards (IPC-A-600/610).Cross-Functional Analysis: Conduct thorough data analysis on test coupon measurements, collaborating directly with Signal Integrity (SI) leads to ensure physical boards meet high-speed performance benchmarks.Technology Research: Execute market research on emerging PCB technologies, advanced substrate materials, and new supplier capabilities to establish a robust internal knowledge base.

Role Overview Arista Networks is hiring an Electrical Manufacturing Engineering Manager in Santa Clara. This manager leads a team focused on improving manufacturing processes and maintaining high quality standards for electrical engineering projects. The team’s work supports the development and production of advanced technology products. What You Will Do Guide and develop a team of electrical manufacturing engineers Oversee process improvements to boost efficiency and product quality Champion new approaches and methods within electrical manufacturing Ensure engineering practices align with the demands of evolving technology

Sustainable Talent is collaborating with Nvidia, a renowned pioneer in computer graphics and accelerated computing for over 25 years. We are seeking a Vehicle Integration Engineer to join our client's AV Operations Team in Santa Clara, CA. This role is a W-2 full-time, short-term contract position with competitive compensation ranging from $60 to $67 per hour, depending on experience, education, and location. In addition, we offer comprehensive benefits, paid time off, and an enriching company culture!As a Vehicle Integration Engineer, you will collaborate with automotive technicians and senior engineers to develop and maintain our autonomous driving platform, which includes various sensors such as cameras, LiDAR, radar, USS, and GPS. Your primary focus will be on troubleshooting vehicle platform issues and ensuring flawless and safe operation of the system on our driving platform. Strong communication, interpersonal, and analytical skills are essential. Hands-on experience with installing, repairing, and updating autonomous vehicle hardware, along with a deep understanding of automotive bus systems (e.g., CAN, Ethernet), is required. Familiarity with autonomous vehicle sensor suite hardware and automotive mechanical and electrical systems is highly valued. Flexibility to work night and weekend shifts as needed is a must.

Join Arista Networks as a Senior Electrical Manufacturing NPI Engineer, where you will play a crucial role in the development and production of innovative networking solutions. You will collaborate with cross-functional teams to ensure seamless integration of new products into manufacturing processes, driving efficiency and quality.

Archer Aviation is a pioneering aerospace company located in San Jose, California, focused on developing an innovative all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to enhance sustainable air mobility, creating aircraft designed to transport four passengers while minimizing noise pollution.We aim high and tackle complex challenges, believing that a diverse workforce enriches our perspectives, stimulates better solutions, and propels us toward collective success. We are committed to fostering an equitable and inclusive workplace that values and celebrates our diverse team members.About the Role:As a vital member of Archer's mission, you will support the scaling of production for our groundbreaking eVTOL aircraft. Within the Manufacturing Design Engineering (MDE) team, your responsibilities will include developing build plans, assembly tooling, form boards, work instructions, and providing design feedback for avionics harnesses throughout the aircraft. You will also troubleshoot and resolve discrepancies in harnesses or routing challenges, collaborating closely with Quality and Design teams.Key Responsibilities:Design Production Systems: Create comprehensive production systems for wire harness installation across the aircraft assembly line, ensuring seamless integration with supplier-fabricated structural assemblies.Partner with Suppliers: Work collaboratively with external suppliers to identify opportunities for the pre-installation of harness standoffs, supports, and select harnesses during structural assembly fabrication.Optimize Installation Processes: Define and document protocols, guidelines, and standards to enhance the speed, safety, and consistency of wire harness installation. Establish preferred components, tooling, and methods.Prevent Damage and Enable Repair: Anticipate potential harness damage during production and create mitigation strategies, repair procedures, and rework standards to safeguard system integrity and safety.Scale for Rate: Strategize for increased production rates by assessing how tools, processes, and production systems must adapt to accommodate higher volumes.Support Certification: Author and maintain process documentation, standards, and evidence necessary for FAA certification and ongoing regulatory compliance.Drive Continuous Improvement: Identify and implement enhancements to improve efficiency and effectiveness in harness production.

About Archer Aviation Archer Aviation designs and manufactures all-electric vertical takeoff and landing (eVTOL) aircraft in Santa Clara, California. The company’s mission centers on advancing sustainable air mobility with a four-passenger vehicle engineered for quiet operation. Archer values ambitious goals and creative problem-solving. The team draws strength from a diverse workforce, with an emphasis on equity and inclusion. Every team member’s perspective contributes to the company’s progress and culture. Role Overview: Senior Manufacturing Test Engineer The Senior Manufacturing Test Engineer joins the Manufacturing Engineering team to lead functional and end-of-line testing for eVTOL aircraft during production. This role ensures each aircraft meets performance, integration, and system-level requirements before delivery or flight testing. Key Responsibilities Validate each aircraft build for design compliance and operational readiness Verify systems, software, and electrical functions during manufacturing Support the transition from prototype builds to full-scale production Location Santa Clara, California, United States

Archer Aviation Inc. is an innovative aerospace company located in San Jose, California, focused on developing a pioneering all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to propel sustainable air mobility, creating aircraft capable of transporting four passengers with minimal noise and environmental impact.We aspire to reach new heights by solving complex challenges, and we believe that a diverse workforce fuels smarter solutions, enhances insights, and drives collective success. Our commitment to an equitable and inclusive workplace celebrates the unique contributions of every team member.About The Role:As we ramp up production of our revolutionary eVTOL aircraft, your role as a Senior Manufacturing Engineer will be pivotal within the Manufacturing Design Engineering (MDE) team. You will serve as a critical link between aircraft design and its manufacturing process.In this position, you will lead the development of structural manufacturing strategies, aligning high-level architectural goals with practical execution to ensure a smooth transition from prototype to early production phases.What You’ll Do:Provide leadership and technical direction for structural assembly and integration processes, encompassing both prototype and production assembly sequencing.Lead the technical development of structural component builds, collaborating with design, quality, and certification teams to ensure manufacturability and compliance from initial concept through to flight test readiness.Develop tooling and fixture solutions for prototype builds, contributing to efficient manufacturing processes.