Staff Process Engineer

Archer Aviation, based in San Jose, California, is building all-electric vertical takeoff and landing aircraft designed for sustainable air travel. The company’s Midnight aircraft carries four passengers and operates with low noise. Archer values a diverse team and aims to create an inclusive workplace where different perspectives drive innovation. Role Over…

Location: Santa Clara, California, United States About Archer Aviation Archer Aviation Inc. designs and builds all-electric vertical takeoff and landing aircraft. Based in San Jose, the company focuses on sustainable air mobility, developing aircraft that can carry four passengers with reduced noise. Archer’s team works to advance electric aviation from concept through manufacturing and operation. The company values diversity and inclusion, believing that a range of perspectives leads to stronger results. Archer supports an equitable workplace where differences are respected and every team member has the opportunity to thrive. Role Overview Archer is scaling up production of the Midnight 1.0 and developing the next-generation Midnight 1.1 platform. The Senior Manufacturing Design Engineer - Methods and Standards will join the Manufacturing Design Engineering (MDE) team. This position connects aircraft design with high-rate production, focusing on standardizing manufacturing processes across the organization. This engineer will help build and maintain a centralized, version-controlled knowledge base for complex manufacturing processes. The role involves close collaboration with Design, Quality, Supply Chain, and Certification teams to implement manufacturing solutions that support bringing new aircraft to market. What You’ll Do Develop, document, and maintain standardized engineering methods and best practices for the MDE organization. Support the creation of manufacturing planning frameworks, process definitions, work instructions, and build readiness for development, certification, and production phases.

Archer Aviation is an innovative aerospace company situated in San Jose, California, dedicated to creating an all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, designing and manufacturing an aircraft capable of carrying four passengers with minimal noise output.We aim high and tackle complex challenges, believing that workplace diversity enriches our problem-solving capabilities, leading to greater insights and collective success. We strive to foster an equitable and inclusive environment that celebrates the unique contributions of every team member.About The Role:As we ramp up production of our cutting-edge Midnight 1.0 aircraft and develop the next-generation Midnight 1.1 platform, you will play a pivotal role within the Manufacturing Design Engineering (MDE) team, linking aircraft design and production seamlessly.In this position, you will lead the manufacturing strategy for aircraft structures and act as a technical expert responsible for defining and scaling the production processes, supporting aircraft builds from prototype stages to early production.You will collaborate across teams, including Design, Quality, Supply Chain, and Certification, to implement industry-leading manufacturing solutions for both current and future aircraft models.What You’ll Do:Provide leadership and technical guidance for structural assembly and integration processes, overseeing both prototype and production assembly sequencing.Manage the complete lifecycle of structural component builds, collaborating with design, quality, and certification teams to embed manufacturing best practices.

Join d-Matrix, where we are dedicated to leveraging the power of generative AI to revolutionize technology. We are pioneering in both software and hardware innovation, constantly expanding the limits of what is achievable. Our workplace culture emphasizes respect and collaboration.We greatly value humility and encourage open communication. Our team is diverse and inclusive, where varied perspectives contribute to superior solutions. We seek individuals who are passionate about overcoming challenges and are motivated by results. Are you ready to discover your potential? Together, we can explore the vast possibilities of AI.Location:This position is hybrid, requiring onsite work at our headquarters in Santa Clara, CA for three days each week.Role Overview: Senior Staff Design Verification EngineerKey Responsibilities:We aim to build a company culture that withstands the tests of time. This role presents a unique opportunity for you to express your creativity and emerge as a leader in an industry poised to make a global impact. We are committed to fostering a culture of transparency, inclusiveness, and intellectual honesty, ensuring that all team members continuously learn and enjoy the journey. You will work on pioneering our industry’s first highly programmable in-memory computing architecture, applicable across a wide range of applications from cloud to edge. Collaborate with a highly experienced team dedicated to building a successful business.Qualifications:Minimum qualifications include:A Bachelor's degree in Electrical Engineering, Computer Science, or a related field with 12+ years of industry experience, or a Master's degree in Electrical Engineering, Computer Science, or a related field with 7+ years of experience.Proven experience throughout the SoC verification cycle from architecture to tape-out and bring-up.Strong understanding of verification methodologies such as UVM/OVM.Hands-on experience with ASIC-SoC design verification testing and debugging.Proficiency in SystemVerilog randomization constraints, coverage, and assertion methodologies.Excellent problem-solving skills and a fervent enthusiasm for tackling challenges, particularly within the AI domain.Extensive experience with SystemVerilog and verification methodologies (UVM/OVM/VMM).

Archer Aviation is an innovative aerospace company headquartered in San Jose, California, dedicated to revolutionizing air travel through the development of an all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, allowing four passengers to travel quietly and efficiently.We strive for excellence in our endeavors and recognize that a diverse workforce enriches our problem-solving capabilities and fosters success. Our commitment to creating an equitable and inclusive workplace supports and celebrates the unique contributions of every team member.About the Role:As a Staff Manufacturing Test Engineer, you will play a crucial role within the Manufacturing Engineering team. Your primary responsibility will be to conduct functional and end-of-line testing on fully assembled aircraft, ensuring they adhere to performance, integration, and system-level standards prior to delivery and flight testing. Your expertise will be essential in validating that each aircraft build meets operational expectations by verifying systems, software, electrical behavior, and overall readiness for functionality.Your Responsibilities:Develop and manage the comprehensive functional test strategy for aircraft systems throughout the manufacturing process, from initial builds to certified production.Facilitate cross-functional collaboration among manufacturing, design engineering, flight testing, and certification teams to establish test requirements and ensure thorough coverage.Design and implement automated testing solutions to enhance quality, consistency, and production efficiency.

Archer Aviation Inc. is pioneering the future of sustainable air mobility from our headquarters in San Jose, California. We are developing an innovative all-electric vertical takeoff and landing (eVTOL) aircraft designed to carry four passengers while ensuring minimal noise pollution. Our mission is to revolutionize air travel while promoting environmental responsibility.At Archer, we embrace challenges that require innovative solutions. We believe that a diverse workforce fosters creativity and drives success. We are committed to cultivating an inclusive environment that celebrates our differences and values every team member.About The Role:As we transition from production to flight testing and operational readiness, we are establishing the necessary infrastructure to support our aircraft in the field.The Senior Manufacturing Design Engineer for Ground Support Equipment (GSE) will serve as the primary point of contact for defining and deploying the ground support equipment essential for maintaining and servicing Archer's eVTOL aircraft in various operational locations, including international sites.

Archer Aviation Inc., located in San Jose, California, is pioneering the aerospace industry with our innovative all-electric vertical takeoff and landing aircraft. Our mission is to revolutionize sustainable air mobility, creating an aircraft capable of carrying four passengers while minimizing noise pollution.At Archer, we aim high, tackle complex challenges, and recognize that diversity is key to our success. We are committed to fostering an equitable and inclusive workplace that values the unique contributions of all team members, promoting a culture of support and celebration.About The Role:As we ramp up production of our cutting-edge Midnight 1.0 aircraft and innovate the next-generation Midnight 1.1 platform, you will join our Manufacturing Design Engineering (MDE) team to seamlessly integrate aircraft design with production processes.In this pivotal role, you will spearhead the manufacturing strategy for aircraft assembly and integration, acting as a technical leader to define and scale Archer's aircraft design and production, guiding the journey from prototype to early production ramp.You will collaborate across various teams—Design, Quality, Supply Chain, and Certification—to establish best-in-class manufacturing solutions for both current and future aircraft platforms.What You’ll Do:Define the manufacturing strategy for aircraft assembly and integration, setting build plans and methods for next-generation aircraft programs in the design phase.Lead the development and execution of scalable manufacturing processes for aircraft, transitioning from prototype to production.

Join d-Matrix, where we are dedicated to unlocking the transformative power of generative AI. As pioneers in both software and hardware innovation, we challenge the limits of technology. Our collaborative culture fosters respect and teamwork, ensuring diverse perspectives lead to superior solutions.We believe in humility and prioritize open communication. If you are passionate about overcoming challenges and driven by results, your playground awaits! Together, we can redefine the future of AI.Location:Hybrid model, with three days a week onsite at our headquarters in Santa Clara, CA.Role Overview: Staff Analog Design EngineerResponsibilities:Engage in analog-mixed signal integrated circuit design utilizing leading-edge tools such as Cadence and Synopsys. Your contributions will include designing cutting-edge in-memory compute engines for AI accelerators and developing Die-Die serial interfaces for scalability.Your scope of work will encompass schematic circuit design, system-level performance analysis, crafting test benches for simulations, and guiding layout engineers on deep sub-micron process nodes (7nm and below). You will also optimize design and layout for low power performance, conduct six-sigma Monte-Carlo yield analysis, and make independent layout adjustments as necessary.Collaborate with backend engineers on design/layout integration.Provide circuit models for backend verification.Participate in testboard design for silicon bring-up and bench debugging or characterization.Develop scripts for silicon bring-up and testing features.

About Halo IndustriesHalo Industries is pioneering innovative technology designed to transform the longstanding semiconductor material slicing process. Our cutting-edge laser-based technology significantly reduces waste, optimizes material cost efficiency, and fosters advancements across dynamic sectors such as automotive, telecommunications, and power electronics. Established in 2014 at Stanford University, Halo secured substantial funding in 2024, enabling swift expansion, strategic customer interactions, and the initiation of high-volume manufacturing.Join Our TeamWe are on the lookout for a Senior Manufacturing Engineer who will bring technical expertise and foster operational excellence within our manufacturing processes. This pivotal role serves as a vital link between product design (Engineering/R&D) and efficient mass production (Production Floor). As the Senior Manufacturing Engineer, you will be the go-to technical specialist responsible for process definition, control, documentation, and ongoing enhancements on the manufacturing line.Key ResponsibilitiesEngineering to Production TransitionR&D/Production Liaison: Serve as the technical intermediary between Research & Development and Production. Convert design intentions, specifications, and performance criteria into actionable manufacturing processes.New Product Introduction (NPI) Support: Engage in product design assessments, ensuring compliance with Design for Manufacturability (DFM) and Design for Assembly (DFA) principles to preempt challenges before they reach production.Manufacturing Process Definition: Innovate, develop, and validate new production equipment, tools, and fixtures essential for product assembly and evaluation.First-Run Analysis: Spearhead and assist initial production runs, gathering data and delivering prompt, root-cause corrective actions to address any process or product challenges encountered during ramp-up.Production Floor Documentation & ControlGuarantee that all manufacturing processes are standardized, regulated, and precisely documented to uphold quality and consistency.Process Documentation Management: Create, evaluate, and sustain essential manufacturing documentation, including:Operator Method Sheets (OMS) or Standard Operating Procedures (SOPs): Develop comprehensive, visual, and user-friendly work instructions for all production stages, covering assembly, inspection, and testing.

Join ServiceNow as a Staff Product Designer specializing in AI transformation. In this pivotal role, you will lead the design of innovative products that leverage artificial intelligence to enhance user experiences. Collaborate closely with cross-functional teams to drive the design vision and influence product strategy.

At d-Matrix, we are dedicated to harnessing the power of generative AI to innovate technology. As industry leaders in both software and hardware, we continually push the limits of what can be achieved. Our culture is built on respect and collaboration, emphasizing humility and direct communication.We celebrate inclusivity, where diverse perspectives lead to superior solutions. We invite passionate individuals who are eager to tackle challenges and are driven by results to join us. Are you ready to explore your potential? Together, we can redefine the endless possibilities of AI.Role OverviewWe are in search of an enthusiastic Manufacturing Engineering Intern with a solid foundation in Electrical Engineering to join our Operations team. This role serves as a vital link between design and physical hardware, focusing on the PCB lifecycle from initial layout to bare board fabrication.This is a remarkable opportunity for students or recent graduates looking to dive into the AI hardware sector. You will work at the convergence of design, quality, and manufacturing, ensuring our high-performance boards are crafted for optimal reliability, scalability, and signal integrity.Key ResponsibilitiesDesign-to-Release Orchestration: Engage in the entire PCB design release process, including reviewing Gerber files, validating stack-ups, and addressing DFM (Design for Manufacturing) inquiries from external fabrication vendors.Supplier Yield Monitoring: Monitor and analyze manufacturing yields at PCB suppliers, providing performance updates to the Operations team while pinpointing areas for process enhancement.Quality & Compliance: Assist in bare PCB qualification and acceptance testing, adhering strictly to IPC standards (IPC-A-600/610).Cross-Functional Analysis: Conduct thorough data analysis on test coupon measurements, collaborating directly with Signal Integrity (SI) leads to ensure physical boards meet high-speed performance benchmarks.Technology Research: Execute market research on emerging PCB technologies, advanced substrate materials, and new supplier capabilities to establish a robust internal knowledge base.

Role Overview Arista Networks is hiring an Electrical Manufacturing Engineering Manager in Santa Clara. This manager leads a team focused on improving manufacturing processes and maintaining high quality standards for electrical engineering projects. The team’s work supports the development and production of advanced technology products. What You Will Do Guide and develop a team of electrical manufacturing engineers Oversee process improvements to boost efficiency and product quality Champion new approaches and methods within electrical manufacturing Ensure engineering practices align with the demands of evolving technology

Join Tenstorrent as a Physical Design Engineer, where you will be at the forefront of cutting-edge semiconductor design. This role will involve working collaboratively with cross-functional teams to develop robust and efficient physical designs, ensuring optimal performance and manufacturability of our next-generation products.

Join Arista Networks as a Senior Electrical Manufacturing NPI Engineer, where you will play a crucial role in the development and production of innovative networking solutions. You will collaborate with cross-functional teams to ensure seamless integration of new products into manufacturing processes, driving efficiency and quality.

Archer Aviation is a pioneering aerospace company located in San Jose, California, focused on developing an innovative all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to enhance sustainable air mobility, creating aircraft designed to transport four passengers while minimizing noise pollution.We aim high and tackle complex challenges, believing that a diverse workforce enriches our perspectives, stimulates better solutions, and propels us toward collective success. We are committed to fostering an equitable and inclusive workplace that values and celebrates our diverse team members.About the Role:As a vital member of Archer's mission, you will support the scaling of production for our groundbreaking eVTOL aircraft. Within the Manufacturing Design Engineering (MDE) team, your responsibilities will include developing build plans, assembly tooling, form boards, work instructions, and providing design feedback for avionics harnesses throughout the aircraft. You will also troubleshoot and resolve discrepancies in harnesses or routing challenges, collaborating closely with Quality and Design teams.Key Responsibilities:Design Production Systems: Create comprehensive production systems for wire harness installation across the aircraft assembly line, ensuring seamless integration with supplier-fabricated structural assemblies.Partner with Suppliers: Work collaboratively with external suppliers to identify opportunities for the pre-installation of harness standoffs, supports, and select harnesses during structural assembly fabrication.Optimize Installation Processes: Define and document protocols, guidelines, and standards to enhance the speed, safety, and consistency of wire harness installation. Establish preferred components, tooling, and methods.Prevent Damage and Enable Repair: Anticipate potential harness damage during production and create mitigation strategies, repair procedures, and rework standards to safeguard system integrity and safety.Scale for Rate: Strategize for increased production rates by assessing how tools, processes, and production systems must adapt to accommodate higher volumes.Support Certification: Author and maintain process documentation, standards, and evidence necessary for FAA certification and ongoing regulatory compliance.Drive Continuous Improvement: Identify and implement enhancements to improve efficiency and effectiveness in harness production.

Archer Aviation, a pioneering aerospace company headquartered in San Jose, California, is at the forefront of developing an all-electric vertical takeoff and landing aircraft aimed at revolutionizing sustainable air mobility. Our innovative design produces a quiet, efficient aircraft capable of transporting four passengers while minimizing environmental impact.We believe in setting ambitious goals and tackling complex challenges, fostering a diverse workplace that enhances our collective intelligence, drives insightful solutions, and paves the way to success. Archer is committed to nurturing an equitable and inclusive atmosphere that values and celebrates our unique perspectives and talents.Role Overview:We are on the lookout for a talented Manufacturing Systems Integration Engineer to architect, deploy, and maintain cohesive manufacturing systems that effectively link operational technologies with enterprise-level business solutions. The ideal candidate will possess practical experience with SCADA/HMI systems, PLM tools, and ERP integrations, driving enhancements in manufacturing efficiency, data management, and system dependability.Key Responsibilities:Design and implement comprehensive manufacturing systems that interlink shop-floor operations with enterprise frameworks.Create and uphold system architecture documentation, integration protocols, and technical roadmaps.Drive cross-functional efforts to merge MES with business applications and enterprise data infrastructures.Diagnose, optimize, and enhance system interfaces, data pathways, and communication protocols.

About Archer Aviation Archer Aviation designs and manufactures all-electric vertical takeoff and landing (eVTOL) aircraft in Santa Clara, California. The company’s mission centers on advancing sustainable air mobility with a four-passenger vehicle engineered for quiet operation. Archer values ambitious goals and creative problem-solving. The team draws strength from a diverse workforce, with an emphasis on equity and inclusion. Every team member’s perspective contributes to the company’s progress and culture. Role Overview: Senior Manufacturing Test Engineer The Senior Manufacturing Test Engineer joins the Manufacturing Engineering team to lead functional and end-of-line testing for eVTOL aircraft during production. This role ensures each aircraft meets performance, integration, and system-level requirements before delivery or flight testing. Key Responsibilities Validate each aircraft build for design compliance and operational readiness Verify systems, software, and electrical functions during manufacturing Support the transition from prototype builds to full-scale production Location Santa Clara, California, United States

Archer Aviation Inc. is an innovative aerospace company located in San Jose, California, focused on developing a pioneering all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to propel sustainable air mobility, creating aircraft capable of transporting four passengers with minimal noise and environmental impact.We aspire to reach new heights by solving complex challenges, and we believe that a diverse workforce fuels smarter solutions, enhances insights, and drives collective success. Our commitment to an equitable and inclusive workplace celebrates the unique contributions of every team member.About The Role:As we ramp up production of our revolutionary eVTOL aircraft, your role as a Senior Manufacturing Engineer will be pivotal within the Manufacturing Design Engineering (MDE) team. You will serve as a critical link between aircraft design and its manufacturing process.In this position, you will lead the development of structural manufacturing strategies, aligning high-level architectural goals with practical execution to ensure a smooth transition from prototype to early production phases.What You’ll Do:Provide leadership and technical direction for structural assembly and integration processes, encompassing both prototype and production assembly sequencing.Lead the technical development of structural component builds, collaborating with design, quality, and certification teams to ensure manufacturability and compliance from initial concept through to flight test readiness.Develop tooling and fixture solutions for prototype builds, contributing to efficient manufacturing processes.

About Archer Aviation Archer Aviation designs and manufactures all-electric vertical takeoff and landing aircraft in Santa Clara, California. The company aims to advance sustainable air mobility by building aircraft that transport four passengers with reduced noise. Archer values a diverse team and works to maintain an inclusive workplace where every contribution matters. Role Overview The Manufacturing Engineering Test Technician supports the quality and performance of Archer’s aircraft during production. This role centers on functional and end-of-line testing, ensuring each aircraft meets integration and performance standards before moving to flight testing. The technician helps bridge the gap from prototype builds to production by validating systems, software, and electrical performance. Key Responsibilities Run aircraft-level functional and end-of-line (EOL) tests on fully assembled vehicles to confirm system integration and readiness for delivery or flight testing. Troubleshoot electrical issues across aircraft systems using tools such as multimeters and oscilloscopes to diagnose and resolve system-level problems. Follow detailed test protocols and document results to support compliance and quality assurance efforts.