Senior Electrical Engineer - Microcontroller & Sensing

Archer is an innovative aerospace company headquartered in San Jose, California, dedicated to revolutionizing air travel with our all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility by developing aircraft that not only carry four passengers but also operate with minimal noise.At Archer, we tackle ambitious c…

SQA Services, Inc. is hiring a Quality PCBA Source Inspector - Level II in San Jose, CA. This position centers on upholding strict quality standards for printed circuit board assemblies (PCBAs). Key Responsibilities Inspect, evaluate, and test PCBA components to ensure compliance with industry standards Verify that assemblies meet specific client requirements Role Focus This role plays a critical part in maintaining product quality by performing thorough checks on PCBAs before they move forward in the production process. Attention to detail and a commitment to quality are essential. Location This position is based in San Jose, CA.

At Archer, we are pioneering the future of aviation with our all-electric vertical takeoff and landing aircraft, designed to enhance sustainable air mobility. Our innovative engineering team is dedicated to creating an aircraft that accommodates four passengers with minimal noise pollution.We believe that tackling complex challenges requires a diverse team, and we are committed to fostering an inclusive workplace that values and celebrates our unique perspectives. Join us in our mission to revolutionize air travel.Key Responsibilities:As an Electrical Analysis Engineer, you will play a critical role in the analysis of circuits within Archer's high voltage battery management system. Your contributions will directly impact the safety and reliability of our innovative aircraft.Conduct thorough circuit schematic analyses, collaborating with safety engineers to identify potential single-point failures.Evaluate the system-level implications of individual component failures within printed circuit board assemblies (PCBAs).Aggregate power consumption data of the BMS PCBAs across various operational modes and correlate findings with laboratory tests.Perform worst-case accuracy analyses on measurement circuits.Utilize circuit simulation tools to model and analyze hardware circuits to support accuracy evaluations.Employ software for automated circuit analysis to facilitate schematic-level Failure Modes and Effects Analyses (FMEAs).Assess the system-level impacts of single-event upsets and latch-ups.Collaborate with reliability engineers to understand electrical operating conditions and determine failure rates.Carry out electrical stress analyses and component derating evaluations for individual components.Work closely with design engineers to ensure BMS hardware meets Archer's stringent safety, accuracy, and reliability standards.

Electric Hydrogen is dedicated to revolutionizing how we produce energy. Our mission is to create sustainable hydrogen solutions through renewable electrolysis, making it affordable for heavy industry and significantly reducing carbon emissions.We are in search of a Senior Staff Electrical Engineer specializing in Grid Power to spearhead the development of connection specifications between Electric Hydrogen’s power systems and the medium voltage utility grid. This role involves overseeing all facets of electrical installation design, which includes collaborating with third-party EPCs and conducting internal design tasks. You will perform in-depth power systems analysis using advanced modeling and simulation software to assess critical system characteristics such as load and power flows, short circuit analysis, transient stability, and stability under various operational conditions.This position is based onsite in San Jose, CA and reports directly to the Director of Power Platform.

Archer Aviation is an innovative aerospace firm located in San Jose, California, focused on developing a pioneering all-electric vertical takeoff and landing aircraft. Our mission is to revolutionize sustainable air mobility, offering a solution that carries four passengers while minimizing noise pollution.We aspire to reach new heights and tackle complex challenges, firmly believing that a diverse workplace enhances our intelligence, fosters better insights, and ultimately leads us to success. We are committed to nurturing an equitable and inclusive environment that values our differences and supports every member of our team.What You’ll Do:In your role as a BMS Electrical Engineer, you will take the lead on hardware designs for Archer’s advanced high voltage battery management system.Oversee the design of BMS PCBAs throughout their entire lifecycle, which includes circuit simulation, schematic capture, layout, routing, reviews, manufacturing, and revisions.Collaborate closely with mechanical and software teams from the outset of the design process to ensure seamless integration of our BMS hardware into the battery pack.Design circuits that ensure diagnostic coverage, redundancy, and fault tolerance, closely cooperating with systems and safety teams to align our BMS hardware with safety standards.Take responsibility for PCBA bring-up and verification, using lab equipment to ensure that the design operates effectively across all conditions and fault scenarios.Assist in software development pertaining to new circuits and revisions, updating and writing interface documents as required.Coordinate production builds with the PM, DFM, supply chain, and quality teams.Support manufacturing and production requirements, which involve design-for-test, root-cause analysis of failures, component traceability, and development of build processes.Collaborate with cross-functional teams to ensure effective integration of the battery pack with other electrical systems on the aircraft.Work alongside BMS integration, software, and controls engineers to facilitate hardware fault injection testing on Hardware-in-the-Loop (HIL) setups and battery packs.

Are you passionate about software development and deployment? Join us as a Build and Release Engineer at 360IT Professionals in San Jose, California. In this role, you will play a critical part in the software development lifecycle, ensuring smooth deployment and integration of cutting-edge applications. Collaborate with cross-functional teams to enhance our release management processes and contribute to our mission of delivering outstanding IT solutions.

Join our innovative team at Etched as an Electrical Engineer specializing in Hardware Systems. In this role, you'll be responsible for designing, developing, and testing cutting-edge hardware solutions that meet the evolving needs of our clients. You will collaborate with cross-functional teams to ensure the successful implementation of advanced technologies.Your expertise will contribute to the creation of high-quality electronic systems, ensuring they are reliable and efficient. We are looking for a proactive engineer who thrives in a fast-paced environment and is passionate about technology and innovation.

archer56 seeks a Senior Electrical Systems Engineer based in San Jose, California. This position centers on creating and improving electrical systems that support the company's technology goals. Role overview Work will involve designing new electrical systems and contributing to the development of advanced solutions. Projects often require a focus on technical progress and ongoing innovation within the organization. Key responsibilities Design and develop electrical systems for new and existing projects Advance technology initiatives within the company Support innovation efforts across engineering teams

Join TD Thornton, a leading consulting firm recognized for our expertise in project management and project control solutions. We pride ourselves on our comprehensive onboarding and training programs that empower every team member to succeed. We welcome applicants from diverse backgrounds, especially those with experience in engineering, construction management, business analytics, scheduling, and project management, who thrive in a collaborative environment.Position OverviewRole: Project ManagerSector: Electric UtilitiesSeniority Level: Open to all levels of experienceLocation: San Jose, CAJob Responsibilities:As a Project Manager, you will spearhead the planning, design, construction, and commissioning phases of significant capital projects in the electric utility sector. You will be responsible for ensuring that projects align with quality, budget, and schedule goals under general direction. Acting as an owner's representative, you will advocate for the client’s interests, provide insightful advice, and make informed decisions. This role demands exceptional leadership, technical acumen, and the capability to manage multi-functional and multi-location project teams using established project management methodologies.Key Daily Responsibilities:• Develop and manage comprehensive project plans that define activities, resources, milestones, and baselines.• Prepare business cases, oversee budgets and contingencies, and maintain project governance documentation.• Track and analyze cost and schedule performance, reporting key variances.• Create and manage Excel reports and dashboards to track project progress.• Lead meetings related to project scoping, constructability assessments, design reviews, bidding, construction, inspections, commissioning, and project closeout reviews.• Negotiate and finalize contracts, oversee change orders, and ensure accurate reporting of project costs.• Facilitate communication, delegate responsibilities, and ensure accountability within project teams.• Conduct on-site reviews of designs and drawings to proactively identify and mitigate potential issues.• Collaborate with governmental agencies to secure necessary permits and approvals.• Engage with clients regarding land rights and property coordination.• Prepare and deliver project updates, risk assessments, and lessons learned presentations to stakeholders.• Identify, monitor, and resolve risks, issues, and opportunities to uphold project schedule and budget performance.

About Archer Aviation Archer Aviation, based in San Jose, California, is developing an all-electric vertical takeoff and landing (eVTOL) aircraft designed for sustainable air mobility. The company aims to create a quiet, environmentally conscious aircraft that seats four passengers. Archer values ambitious goals, technical challenges, and a workplace that welcomes diverse perspectives and backgrounds. Role Overview: Battery Test Engineer - Electrical The Battery Test Engineer - Electrical will focus on the testing and validation of battery and battery management system (BMS) components for Archer's eVTOL aircraft. This role involves hands-on work with prototype and certified hardware, as well as collaboration with multiple engineering teams. Main Responsibilities Conduct systems and integration testing for prototype and certified battery and BMS components. Work with teams across BMS, Controls, Engines, Flight, Integration, and Systems to develop and execute testing plans for flight hardware. Assist with regression testing activities. Support testing related to electromagnetic compatibility (EMC), short circuit, and electrical design infrastructure. Develop and test mission profiles for battery systems. Help build digital testing infrastructure for data storage and analysis. Analyze test data and collaborate with engineering teams to drive improvements. Design and implement automated test equipment as needed. Support electrical infrastructure design for Production and Reliability labs. Prepare technical reports for FAA regulatory submissions.

Archer Aviation Inc. is pioneering the future of sustainable air travel from our headquarters in San Jose, California. We are dedicated to designing and manufacturing an innovative all-electric vertical takeoff and landing (eVTOL) aircraft that not only carries four passengers but also minimizes noise, contributing to a greener planet.At Archer, we believe in the power of diversity and inclusivity in the workplace, driving better insights and collective success. We are committed to creating an equitable environment that embraces our differences, supporting and celebrating every member of our team.Your Responsibilities:Lead the diagnostics and analysis of electric engines.Perform thorough teardowns of electric engines and conduct root cause analyses.Act as the main technical authority for identifying and resolving critical issues throughout the design and development phases.Make informed decisions to prioritize essential concerns affecting product safety and performance.Innovate advanced systems and procedures.Establish comprehensive teardown protocols and documentation for electric engines.Create systems for real-time health monitoring of electric engines.Define end-of-line testing specifications for electric engines to ensure their quality and reliability.Champion engineering excellence.Take ownership of field failure analyses and implement corrective actions to prevent recurrence.

Archer Aviation is an innovative aerospace company located in San Jose, California, dedicated to revolutionizing air travel through the development of an all-electric vertical takeoff and landing aircraft. Our mission is to promote sustainable air mobility by designing and manufacturing aircraft that can transport four passengers while minimizing noise.We set ambitious goals, tackle complex challenges, and believe that a diverse workforce enhances our intelligence, drives better insights, and ultimately leads to greater success. We are committed to fostering an equitable and inclusive workplace that recognizes and celebrates our diverse team members.Key Responsibilities:Lead the mechanical design of high-power electrical assemblies, including DCDC converters, chargers, and motor controllers, from concept to completion.Collaborate with cross-functional teams, including mechanical, systems, electrical, safety, and manufacturing engineers, to optimize designs for overall vehicle performance.Address electric propulsion design challenges encompassing thermal management, high-voltage electrical isolation, interconnects, shock and vibration resistance, environmental sealing, and electromagnetic interference.Execute detailed designs for components such as plastic housings, sheet metal brackets, insulation systems, high voltage connectors, fasteners, and structural supports.Perform thorough analyses to ensure designs meet regulatory and performance requirements, utilizing heat transfer, thermal analysis, design for assembly, structural calculations, and failure mode analysis.Develop and implement engineering test plans for design validation.Create assembly and component drawings and collaborate with suppliers for manufacturing.Oversee engineering prototype builds and design validation testing.

Join Archer Aviation, a pioneering aerospace firm located in San Jose, California, dedicated to revolutionizing air mobility with our all-electric vertical takeoff and landing aircraft. Our mission is to promote sustainable air travel while ensuring minimal noise pollution, as our aircraft is designed to safely transport four passengers.We are committed to solving complex challenges and fostering a diverse workplace that fuels innovation and success. Our inclusive environment values differences and supports every team member in their journey towards excellence.As a Senior Propulsion Electrical Systems Engineer, you will lead the lifecycle of Airborne Electronic Hardware (AEH) systems for our electric propulsion units (EPU). This pivotal role connects intricate power electronics design with aircraft certification, encompassing responsibilities like defining requirements, overseeing DO-254 compliance, and conducting thorough verification and validation (V&V) campaigns for high-voltage inverters and motor control hardware. Your contributions will ensure our electric engines adhere to rigorous safety standards and environmental resilience necessary for Part 33/Part 23 certification.

About Hark Hark is at the forefront of artificial intelligence, creating advanced, personalized systems that proactively engage with users. Our innovative technology integrates speech, text, vision, and persistent memory to redefine human-machine interaction. We are pioneering the next generation of hardware that facilitates a seamless interface between humans and machines. Unlike traditional AI, which relies on outdated interfaces, Hark is committed to developing agentic systems that communicate naturally and intuitively with the real world. To achieve this vision, we are building multimodal models and next-gen AI hardware, meticulously designed as a cohesive interface for a new era of intelligent systems. About the Role We invite you to join our dynamic team as an Electrical Engineer, where you will take charge of the power architecture for our cutting-edge portable devices. Your expertise will ensure our products are safe, efficient, and durable. From selecting optimal battery chemistries to fine-tuning PMIC registers and developing intricate power models, you will ensure that every milliwatt is effectively utilized.

Astera Labs (NASDAQ: ALAB) builds rack-scale AI infrastructure by developing advanced connectivity solutions. The company works with hyperscalers and partners across the ecosystem to help organizations make the most of modern AI. Astera Labs' Intelligent Connectivity Platform integrates semiconductor technologies such as CXL®, Ethernet, NVLink, PCIe®, and UALink™ with the COSMOS software suite to support flexible, scalable connectivity systems. Role overview This Electrical Validation Engineer Internship for 2026 is located in San Jose, CA. The internship centers on post-silicon validation for connectivity products. Interns will take on lab-based challenges that require both hardware and software skills, contributing to real engineering projects. What you will do Support post-silicon validation activities for Astera Labs' connectivity solutions Troubleshoot and solve lab challenges involving hardware and software Work closely with cross-functional teams throughout the validation process Collaboration Interns will interact with engineers and other teams to address technical challenges and ensure product quality during validation.

Astera Labs, based in San Jose, CA, creates connectivity solutions tailored for rack-scale AI infrastructure. The team works with technologies including CXL®, Ethernet, NVLink, PCIe®, and UALink™ as part of its COSMOS software suite. These products support both standard and custom architectures for organizations building scalable systems for AI workloads. More information can be found at www.asteralabs.com. Role overview The Electrical Validation Engineer - NCG 2026 will contribute to the development and execution of electrical validation tests, measuring device performance across various system conditions. This role plays a key part in ensuring Astera Labs’ connectivity products for AI and Machine Learning meet strict parametric standards and customer requirements. What you will do Create validation strategies for new products after silicon fabrication Automate testing for integrated circuits and board-level products Design experiments to investigate and address unexpected device behaviors Collaborate with internal teams to assess performance margins and confirm compliance with specifications

About Archer Aviation Archer Aviation is an aerospace company based in San Jose, California, focused on building all-electric vertical takeoff and landing (eVTOL) aircraft. The team is developing aircraft designed to carry four passengers quietly, with the goal of advancing sustainable air mobility. The company values excellence and believes that a diverse, inclusive workplace leads to stronger results. Archer works to create an environment where every team member has the chance to succeed. Role Overview: Electric Propulsion System (EPS) Manufacturing Technician The EPS Manufacturing Technician plays a key part in building and assembling electric propulsion system components for Archer’s eVTOL aircraft. What You Will Do Build stators and support assembly of electric engine subassemblies, including winding, insulation, impregnation, and mechanical assembly. Work with both manual and automated tools. Work closely with Manufacturing and Design Engineering teams to help set up equipment, refine processes, and support validation work. Troubleshoot equipment and process issues during stator production and testing. Take part in ongoing improvement efforts. Location This position is based in San Jose, California, United States.

Astera Labs is looking for an Electrical Hardware Engineering Intern to join the Hardware Design Group in San Jose, CA for 2026. This internship offers practical experience in hardware design and development, working directly with a team focused on connectivity ASICs. Role overview This position centers on supporting the design and development of hardware products. Interns will work closely with experienced engineers, gaining exposure to the full hardware development process. What you will do Assist with hardware design activities for devices that use Astera Labs connectivity ASICs Help with the development and initial bring-up of significant hardware projects Work on key engineering tasks as part of a collaborative team Location This internship is based in San Jose, CA.

Trackonomy Systems is seeking a Senior NPI Engineer specializing in Electrical Engineering to help drive the next generation of technology solutions from our San Jose location. Role overview This position plays a key part in Trackonomy’s mission to develop technology that improves safety and security across industries. The Senior NPI Engineer will contribute to projects that range from fire prevention systems to advanced security measures, supporting initiatives that have a real-world impact. Collaboration and community At Trackonomy, every team member is valued as a core contributor. The company fosters a culture where each person’s input shapes the vision and direction. Expect to work closely with senior leaders and colleagues from different departments, building connections that support both personal and professional growth. Professional development Trackonomy emphasizes learning through hands-on experience and collaboration. This role offers the chance to take on varied responsibilities, learn directly from experienced leaders, and influence the scope of your work based on your skills and achievements. The company values ambition, innovation, and the drive to make a difference, providing an environment where merit and opportunity are prioritized. Purpose and impact Work at Trackonomy centers on delivering technology that makes a difference. The solutions developed here not only transform industries but also contribute to saving lives. Senior NPI Engineers play a central role in this mission, helping bring new products to market that address critical challenges.

Archer Aviation is revolutionizing the aerospace industry from our base in San Jose, California. We are committed to developing an innovative all-electric vertical takeoff and landing aircraft, designed to enhance sustainable air mobility. Our aircraft, capable of carrying four passengers, operates with minimal noise pollution, aligning with our vision for a greener future.At Archer, we aim high and tackle complex challenges. We believe that diversity fuels our creativity and drives success. Our company fosters an inclusive, equitable environment where every team member's contributions are valued and celebrated.What You’ll Do:Contribute to the design, fabrication, testing, and certification phases of Archer's piloted eVTOL aircraft.Develop Electrical Installation Designs for all Flight Test Instrumentation hardware in flight test aircraft.Assist in planning installations and coordinate with manufacturing for flight test instrumentation integration on test aircraft.Collaborate with internal teams and external vendors to address instrumentation and measurement challenges.Serve as a principal advisor to the Instrumentation Director on all electrical design activities related to aircraft instrumentation.Create processes and documentation to facilitate the installation and maintenance of flight test instrumentation.Partner with Flight Test Engineering and Certification Teams to execute all necessary flight test activities for development and certification.Work with engineering design and analysis teams to develop a comprehensive instrumentation plan, including monitoring of strain, temperature, vibration, pressure, air data, and environmental control systems.Design all necessary hardware for flight testing, including instrumentation racks, air data booms, aircrew interfaces, workstations, camera and telemetry systems.Support instrumentation technicians and the Aircraft Operations Team in implementing instrumentation designs.Ensure that all flight test instrumentation tasks are completed on schedule and within budget.